Chapter 2: Hardware Setup
2-30
2.11
Expansion cards
The system supports half-height/half length and half-height/low-profile expansion cards such
as the PIKE II series cards.
To install a half-height/half-length expansion card:
1.
Remove the screw on the rear and on the top of the metal casing as shown.
2.
Remove the metal casing.
Use both of your hands in performing the following steps.
3.
Remove the screw then remove the metal cover.
Metal cover
Summary of Contents for ESC8000 G3
