6-20
Chapter 6: RAID Configuration
Using the Objects command
To check data consistency using the Objects command:
1.
From the Management Menu, select Objects, and then select Virtual Drive from the
sub-menu.
2.
Use the arrow keys to select the virtual drive you want to check, and then press
<Enter>.
3.
Select Check Consistency from the pop-up menu, and then press <Enter>.
4.
When prompted, use the arrow keys to select Yes from the dialog box to check the
drive.
5.
When checking is complete, press any key to continue.
Summary of Contents for ESC8000 G3
