ASTi Synapse Voisus Server Manual (Ver. 1, Rev. F1)
78
Copyright © 2012 Advanced Simulation Technology inc.
E. Dedicated Server Mode
1. The Voisus-VBS2 Plugin interface is not showing up in the VBS2 display.
a. Ensure Voisus client is installed on each VBS2 client computer and the VBS2
server.
b. Ensure the ASTi init.sqf files was added to the proper mission folder and it was
exported to Network Scenarios as described in Step 5 sub-step 3.
F. VBS2 Missions
This section applies to software version 4.36 and above.
1. When starting a VBS2 mission, users are presented with the following error message (see
message below).
a. Ensure that Voisus has been activated for the VBS2 installation that is currently run-
ning.
b. Quit VBS2 and use the Voisus VBS2 Manager to activate the VBS2 installation you
are currently using. See the installation steps in this appendix for more information on
the Voisus VBS2 Manager. Restart VBS2 and relaunch your mission.
