ASTi Synapse Voisus Server Manual (Ver. 1, Rev. F1)
Copyright © 2012 Advanced Simulation Technology inc.
11
2.2.3. Telestra Installation
The Synapse Voisus Server is hosted on the Telestra platform. In addition to the Telestra chassis,
you will need the following items:
• Monitor
• Keyboard
• Power cord
• CAT5 or CAT6 cable
• Network connection
Ethernet Port Connections
Port
Connection
Eth0
DIS (Inter-Telestra Comms)
Voisus (Telestra - Client Computer Comms)
Eth1
ACENet (ACE-RIU)
Eth2
Voisus (Telestra - Client Computer Comms, Alter-
nate Configuration)
PROPERTY OF
ASTI
0000
Network Ports
See chassis labels for ethernet assignment
Ethernet labels will be Eth0, Eth1, and Eth2
Figure 4: Network Ports
Please read the Eth0, Eth1, and Eth2 labels on your system to verify the Ethernet locations.
Follow these steps to install the Telestra platform:
1. Connect Telestra platform to a monitor and keyboard. Note that a monitor and keyboard
are only necessary for initial software configuration.
2. Connect the Telestra’s Ethernet interface(s) to the Studio management system, the Voisus
client computers and the DIS network (linking to other Telestras). See section 2.2.1. for
network configuration guidance.
3. Connect to power.
