ASTi Synapse Voisus Server Manual (Ver. 1, Rev. F1)
Copyright © 2012 Advanced Simulation Technology inc.
19
3.3. ACE-RIU Setup
1. Complete ACE-RIU installation, as described in section 2.2.3.
2. Power on the ACE-RIU.
3. In RMS, navigate to
Network > ACE-RIUs
.
The connected ACE-RIU is listed on this page and has a green check mark under the ‘Sta-
tus’ column, if there is a red ‘
X
’ under the ‘Status’ column there is a problem with the
ACE-RIU.
4. Select ‘
Name
.’ Rename the device to “RIU1” as shown below. Please note that the device
name is case sensitive and must match the name in the ACE software.
