ASTi Synapse Voisus Server Manual (Ver. 1, Rev. F1)
Copyright © 2012 Advanced Simulation Technology inc.
29
Step 6: Set up the Voisus Channels
1. In the Icon View, right-click the Channels icon and select ‘
Clone and Replace
’ and
rename it.
2. Double-click the Channels icon to open it.
3. Select an Client under ‘
Channel Name
.’
4. Set the
Configured Radios
number. This sets the number of radios the operator will have
access to. Voisus clients can have a maximum of 16 radios and VBS2 clients can have up
to 8 radios maximum.
5. Select the Radios that were configured previously in the Radio Helper.
6. Set the
Rx/Tx
. ASTi recommends setting most radios to Rx, multiple radios set to Rx/Tx
may cause confusion.
7. Set the
RX/TX
Lock
. Lock prohibits the operators ability to change the Rx/Tx status.
For example, Operator 1 has access to 3 radios. Two of those radios are Rx only and are
locked. The operator cannot transmit on these two radios. The third radio is unlocked,
therefore the operator can change the Rx/Tx settings, if desired.
8. Set the
Net
Lock
. Lock prohibits the operators ability to change the Net for that position.
Only Client_01 is configured with 4 radios in the default project, complete the configuration of
the other clients.
