ASTi Synapse Voisus Server Manual (Ver. 1, Rev. F1)
Copyright © 2012 Advanced Simulation Technology inc.
15
3.2. Telestra Setup
1. Power on the Telestra and allow it to boot.
2. Login with
Username:
root
Password:
abcd1234
3. At the prompt type:
ace-net-config -a xxx.xxx.xxx.xxx -n yyy.yyy.yyy.yyy
where “
xxx.xxx.xxx.xxx
” is the IP address and “
yyy.yyy.yyy.yyy
” is the net-
mask.
This sets the IP address and netmask for
Eth0
which is used to access the Remote Man-
agement System (RMS) via a browser to complete the network setup.
4.
Optional
: For more network setup options type:
ace-net-config -h
5. Reboot the Telestra to activate the changes.
Once you have configured the Telestra IP address, you can use ASTi’s web-browser based
Remote Management System (RMS) interface to make subsequent changes to the Telestra net-
work settings.
