ASTi Synapse Voisus Server Manual (Ver. 1, Rev. F1)
Copyright © 2012 Advanced Simulation Technology inc.
73
Step 6: Selecting an Operator
The Operator contains the radio assets that are previously assigned in the Voisus Server comm
plan configuration, see the ‘
System Software Configuration
’ section in this document for more
information.
This step must be performed by all VBS2 operators upon opening VBS2 and every time an opera-
tor needs to change radio assets. Once selected, an operator will remain active until changed by
the user.
1. To open the Voisus options page, press ‘Alt +O’. Note: This is the default key combina-
tion. However, VBS2 administrators are capable of changing this key combo.
In the Voisus options page the user can:
• View and select available operators
• Change Voisus Server IP address
• Change radio and GUI settings
2. Select an operator.
3. Press the Ok button.