EFD1000 E5 Dual Electronic Flight Instrument (EFI) Install Manual
DOCUMENT # 900-00041-001
PAGE 129-226
REVISION D
© Copyright 2019 Aspen Avionics Inc.
Figure 9-26: Back-up NAV/GPS Indicator (GNS-430/530)
EFD1000 E5
GPS/NAV Receiver
with internal NAV
Converter
KI-525A
KI-202
KI-206
KI-207
KPI-552
GI-102/A
GI-106/A
GNS-430
GNS-530
1
If connected to P4006/P5006 then the NAV indicator
will be tied directly to the VLOC receiver and will be
independent of any EFD indications. If connected to
P4001/5001 then output switches between GPS and
NAV with CDI Select button on GNS and operation is
as below.
Complete EFD to GNS hook-up is shown on previous
drawings.
2
3
NAV Indicator
NAV FLG+
NAV FLG-
CDI +RIGHT
CDI +LEFT
+ TO
+ FROM
OBS RES A/H
OBS RES C
OBS RES G
OBS RES F
OBS RES E
OBS RES D
GS FLG-
GPS Annun
VLOC Annun
GS FLG+
GS +DN
GS +UP
1
4
If ARINC 429 connection is made the Garmin GPS will
use the digital OBS from the PFD. If the digital OBS goes
invalid it will then use the analog OBS from back-up NAV
indicator.
ARINC 429
See Figures 9-6
and 9-7 for
EFD1000 to
GNAV interface
Refer to manufacturers’ documentation to verify the
integration data and for information regarding checkout
procedures. This drawing, as it pertains to the non-Aspen
equipment, is for reference only.
Operation when connected to P4001/5001:
GPS OBS Operation with an EFD1000 E5 and a Mechanical Standby Nav Indicator
When the EFD1000 E5 and a mechanical standby Nav indicator are both connected to an integrated VOR/Localizer/
GPS Navigation system, the standby indicator and the EFD1000 E5 operate normally in all VOR, GPS and localizer
modes.
When the GPS OBS mode is selected, the EFD1000 E5 course selector commands the GPS OBS course and the
mechanical standby nav indicator OBS course selector is ignored. The left/right indications are shown on both
displays. When the EFD1000 E5 is turned off, the course selector on the mechanical standby Nav indicator
commands the GPS OBS value.
Course Pointer Operation with Integrated VOR/Localizer/GPS Navigation Systems
During manual or automatic operation of the integrated system, when transitioning from GPS guidance to VOR or
localizer guidance, ensure that the course pointer on the EFD1000 E5 is set to the appropriate course.