ASP Sterrad Velocity Reader, User Manual

Page: 33 / 82

Operation
4
STERRAD VELOCITY Reader User’s Guide 27
The reader will ask for confirmation that the instructions have been viewed.
Touch
Yes
to continue to Result Confirmation. Touch
No
to return to the previous screen.
In Result Confirmation, view the result summary by touching
View and Print Result
Summary
. Touch
OK
or remove the positive control BI from the well to return to the
Status Screen. Touching
View and Print Result Summary
opens the Result Summary
page. If a printer is connected to the reader, touch
Print
on the lower left to print the
Result Summary. Touch
Add Note
to leave notes about this specific result. Touch
Done
or remove the BI to return to Result Confirmation.
Touch an open well indicator or place the second positive control BI in an open
well. The reader will ask to confirm that a second positive control is being added. Touch
No to go to the Status Screen. Touch Yes and refer to the “Adding a Positive Control BI”
section (Chapter 4) for further instructions.
9
Note:
The reader cannot confirm the test results without comparing the results to a
valid positive control.
Figure 21.
First Negative Result for a Positive Control
Second Negative Result on a Positive Control
A second negative result on a positive control BI will be accompanied by an
audible alarm and a red warning screen which indicates the well where the negative
result occurred. Touch
Continue
or remove the BI to silence the alarm and go to the
next steps. Enter the operator’s name and follow the directions for handling a second
negative result. Touch
Done
when finished.