TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
63
Figure 24. Configure the Kerberos client.
1
Select General > Admin.
2
Click on the blue text link "Join realm" in the
Delegated Authentication
section.
3
In the
Join Kerberos realm
window, enter the following in the text fields:
Realm: Enter the realm name of the Kerberos server.
Host name: The MAC address of the device. Default value is used.
Admin user name and Admin password: Enter the user name and password for a
user with administrator account or join the realm account on the Kerberos server.
4
Click "Join".
Configure IPBS/IPBL as a client in a large existing system (many clients)
Precondition: All Masters and Radios are running on either software version 3.x.x or
software version 4.1.x.
1
Install either the software version 4.1.x or software version 5.x.x using the update
server and an update script, see
8.1.4
Configure Automatic Firmware Update
on
page 68.
2
Setup the update server using the update script described in
Appendix F
.
3
Select DECT > Radio config.
4
Go to the
Update
section.
5
In the
Command File URL
text field, enter the path to the update server and the
name of the update script.
6
In the
Interval (min)
text field, enter the update period.
7
Click "OK".
After the script is executed and each Radio is restarted, the Kerberos client will join the
Kerberos Server and it shall be possible to see all joined Kerberos clients in the bottom of
the
Kerberos Server
tab.
The way the update script is done in
Appendix F: Update Script for Configuration of
Kerberos Clients
it will automatically disable the local login possibilities if the joining was
successful.
