TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
51
3
Set a static IP address and set DHCP to off, see
8.2.2
Set a Static IP Address
on page
80.
4
Set the mode to Standby Mobility Master, see
8.5.18
Select Mobility Master Mode
on page 97.
5
Enter the primary Mobility Master IP address, see
8.5.18
Select Mobility Master
Mode
on page 97.
6
Enter a login name and enter a password, this must be the same as in the primary
Mobility Master. See
8.5.18
Select Mobility Master Mode
on page 97.
7
Connect to other Mobility Master(s). This should be the same Mobility Master(s) as
in the primary Mobility Master, see
8.5.19
Connect Mobilty Master to other
Mobility Master(s)
on page 98.
8
Enter the Time Server address, see
8.1.5
Configure the NTP Settings
on page 68.
7.6
Configure the Pari Master
This section describes how to configure the Pari Master. Each configuration step is briefly
described in the step list below. For more detailed information see the corresponding
subsection in
8
Operation
on page 60.
1
Determine the address and access the GUI, see
7.2
Access the GUI
on page 42.
2
Change the default password, see
7.2.2
Change the Default Password
on page 44.
3
Configure LDAP user name and password, select the
Write Access
check box, see
8.4.1
Configure LDAP Server
on page 82.
4
Set a static IP address and set DHCP to off, see
8.2.2
Set a Static IP Address
on page
80.
5
Set the mode to Master, see
8.5.13
Select Mode
on page 94.
6
Perform a reset to restart the IPBS/IPBL in Master mode, see
8.22
Reset
on page
138.
7
Select system name and password, see
8.5.1
Change System Name and Password
on page 89.
8
Change subscription method, see
8.5.2
Set Subscription Method
on page 89.
9
Configure authentication code, see
8.5.3
Configure Authentication Code
on page
90.
10
Select tones, see
8.5.4
Select Tones
on page 90.
11
Set default language, see
8.5.5
Set Default Language
on page 90.
12
Set frequency band, see
8.5.6
Set Frequency Band
on page 90.
13
Enable carriers, see
8.5.7
Enable Carriers
on page 91.
14
Enable local R-key handling, see
8.5.8
Local R-Key Handling
on page 91.
15
Enable No transfer on hangup, see
8.5.9
No Transfer on Hangup
on page 91.
16
Configure coder, see
8.5.10
Configure Coder
on page 91.
17
Select supplementary services, see
8.5.12
Configure Supplementary Services
on
page 92.
18
Set Master Id, see
8.5.14
Set Master Id
on page 94.
19
Enable Pari function, see
8.5.15
Enable PARI Function
on page 94.
20
Enter gatekeeper IP address or ID, see
8.5.16
Configure Gatekeeper
on page 95.
21
Connect to a Mobility Master, see
8.5.21
Connect Master to a Mobility Master
on
page 98.
