ASCOM IPBL Installation And Operation Manual Download

Page: 140 / 178

TD 92579EN

15 February 2012 / Ver. H

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)

132

Figure 32. Upgrade the RFP

Select "Immediate" or "Scheduled" update.

Select "In sequence" check box to update the selected RFPs one by one.

Select "When idle" check box to start the update when the RFP is idle.

Mark the applicable RFPs to be updated.

Click "Start" to upgrade the selected RFPs.

The RFP restarts after the upload is finished.

8.19 System Upgrade in System with Mobility Masters

Upgrade in the following order:

Upgrade all Standby Mobility Masters.

Upgrade all Mobility Masters.

Upgrade all of the remaining devices for each site by following the upgrade
sequence under

8.15.2

Upgrading Sequence

on page 127.

Summary of Contents for IPBL



















































































































































































Search results

Summary of Contents for IPBL

Reviews:

Related manuals for IPBL

Brands by name

Popular brands

ASCOM IPBL, Installation And Operation Manual

Search results

Summary of Contents for IPBL

Reviews:

Related manuals for IPBL

Brands by name

Popular brands