TD 92579EN
15 February 2012 / Ver. H
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 5.0.x)
94
3
Click "OK".
4
Reset in order to make the changes take effect, see
8.22
Reset
on page 138.
Figure 22.
Figure 29. Supplementary services
8.5.13 Select Mode
1
Select DECT > Master.
2
Select in the Mode drop-down list:
• "Off", if this IPBS/IPBL is a Slave
• "Active", if this IPBS/IPBL is the Master.
• "Standby", if this IPBS/IPBL is the Standby Master.
• "Deployment" is used for coverage test only. The speech from the handset is
looped back to the handset.
3
If you have selected the "Standby" mode enter the primary Master IP address in its
text field.
4
Click "OK".
5
Reset in order to make the changes take effect, see
8.22
Reset
on page 138.
8.5.14 Set Master Id
1
Select DECT > Master.
2
Enter a Master id in the Master Id field. The id must be unique for each Master in a
multiple Master system. The Standby Master must have the same id as the Master.
3
Reset in order to make the changes take effect, see
8.22
Reset
on page 138.
8.5.15 Enable PARI Function
The PARI Master is responsible for assigning PARIs, being part of the same external
handover domain, to the Radios associated. A Radio will always be given the same PARI,
based on the PARI-mac-address-association.
