ASCOM Ascotel AIP 6350, System Manual

Page: 28 / 64

AIP 6350 / Office 35IP
28 IP Terminal Office 35IP
4.6.3 Expanding the System with IP Terminals
The following describes how to expand the system with additional IP terminals.
For this the PBX does not have to be taken out of operation:
1. Check to make sure that none of the following limits are exceeded as a result
of the expansion:
– Admissible number of system terminals on the PBX (a PBX upgrade may be
necessary)
– Admissible number of IP terminals per AIP card (another AIP card may be
necessary).
– Maximum number of simultaneously active voice channels on the AIP card
(the DRS modules may have to be removed).
– Maximum number of simultaneously active voice channels in the
bandwidth areas concerned (bandwidth may have to be increased).
2. Specify the call numbers and IP addresses of the new terminals and configure
them in the PBX using AIMS.
3. Install the IP terminals as indicated in the Chapter "IP Terminal Office 35IP",
page 20.
4. Use AIMS to check the settings of the set codec, the allocated bandwidth area
and the allocated static routes.
5. Carry out a connection check.