ASCOM Ascotel AIP 6350, System Manual

Page: 14 / 64

AIP 6350 / Office 35IP
14 Initial Installation
3.2 Installation
The aim of the installation phase is to:
• Fit the AIP card(s) and connect them to the network.
• To connect the IP terminals to the power supply and the network.
• Enter the addresses on the IP terminals.
Proceed as follows:
1. Install the AIP card(s) as indicated in the instructions in the Chapter "Expan-
sion Card AIP 6350", page 29.
2. Install the IP terminals as indicated in the Chapter "IP Terminal Office 35IP",
page 20.
3.3 Configuring
The aim of the configuration phase is to define and set all the system parameters
using AIMS.
You can carry out the settings online directly on the PBX or prepare all the settings
in the offline mode and then load them onto the PBX. To do so please refer to the
AIMS online help.
You need to have System Manager or Installer authorisation to have access to the
configuration data.