ASCOM Ascotel AIP 6350, System Manual

Page: 50 / 64

AIP 6350 / Office 35IP
50 Annex
Tab. 29: CM_1_4_5_AIP Cards
Parameters Parameter values Explanation
Slot (<Slot No.>) Slot in which the current AIP card is located.
On/Off *On/Off Off: Card not active; assigned IP terminals
unobtainable
State (Barred/Prebarred/
In operation/SW Upload) Indicates the current card status
SW Version (Software version) Indicates the card's software version
Active Voice Channels (0 to 12) Indicates how many voice channels are activ
MAC address (<address>) MAC address of the AIP card
IP Address <address> IP address of the AIP card.
The card has to be restarted whenever the IP
address is changed
Subnet Mask <address> Subnet of the AIP card.
The card has to be restarted whenever the sub-
net mask is changed
Ethernet *Autosense/10BaseT/
100BaseT Sets the AIP card and the IP terminals to the
Ethernet connection type used.
CoS Priorisation On/*Off Activates Layer-2 prioritisation (see "Prioritis-
ing", page 42)
CoS Priorisation Level 0 Best Effort
1 Background
2 Standard
3 Excellent Effort
4 Streaming Multimedia
*5 Interactive Multimedia
6 interactive Voice Specifies the priority of the voice packets when
CoS prioritisation is activated.
Level 5 has to be set for a good speech quality.
Setting is valid for AIP card and its IP terminals.
VLAN-ID *1 to 4094 The AIP card and its IP terminals can be assigned
to a virtual LAN (VLAN) or form such a LAN. The
VLAN is identified by its ID.
VLAN must be supported by all switches. Set-
ting is valid for AIP card and its IP terminals.
ToS Priorisation Level 0 Best Routine
1 Priority
2 Immediate
3 Flash
4 Flash Override
*5 Critical
6 Internetwork Control
7 Network Control ToS IP Precedence: Specifies Layer-3 priority for
the voice packets (see "Prioritising", page 42).
Level 5 has to be set for a good speech quality.
Levels 6 and 7 are reserved for the network
administration and should not be used.
Setting is valid for AIP card and its IP terminals.