ASCOM Ascotel AIP 6350, System Manual

Page: 35 / 64

AIP 6350 / Office 35IP
Expansion Card AIP 6350 35
5.6 Commissioning the AIP Card
When the PBX is switched on with a newly installed AIP card, the green system
LED on the AIP card should start flashing (see Fig. 7, page 29). The network LEDs
have the following functions:
Tab. 15: Functions of the LEDs on the AIP card
The correct installation of the AIP card on the network can be tested from a PC
using the Ping utility. To operate the Windows Ping utility proceed as follows:
1. Select "Run" from the Start menu.
2. In the input field enter the Ping command: "ping <IP address>".
3. Confirm with "ENTER".
If there is no response to the Ping command, the AIP card is not detected.
There may be several reasons for this:
• Faulty physical connection between the AIP card and the network.
• The IP address or subnet mask of the PC or of the AIP card is incorrect or not
identical.
• There is a malfunction in the network or on the PC.
After successful commissioning, AIP can be configured using AIMS.
LED name Colour Function
Link green • lit when connected to the network
• flashes irregularly during data exchange
100 Mbit green • lit when connected to a 100 Base-T network
• off when connected to a 10 Base-T network
Collision red Collision detection