laserBIRD™ Installation and Operation Guide
30
30
30
30
6.
Rotate your sensor to the position shown in the diagram you selected
in Step 5. Click on the
'Settings'
tab and enter the corresponding
angles as 'Angle Align' values:
For example: for "Top"
Angle Align: 0.0 -90.0 0.0
(select 'Apply' to send to the Scanner)
7.
Now go back to the
'Data'
tab. Read and record the sensor
orientation angles
Azimuth (AZ1), Elevation (EL1), and Roll
(RL1)
being returned from the laserBIRD. These angles describe
the orientation of the Scanner relative to your desired reference
frame.
8.
Click on the
'Settings'
tab and enter as 'Reference Frame' settings
the values you just recorded in Step 7.
Reference Frame: AZ 1 EL1 RL1
(values from Step 7)
Select 'Apply' to send these settings to the Scanner.
9.
Click on the
'Data'
tab and read the new sensor orientation angles.
If the sensor has not moved, all angles should be close to '0'.
Summary of Contents for laserBIRD
