Ascension laserBIRD, Installation And Operation Manual

Page: 23 / 98

laserBIRD™ Installation and Operation Guide
16
16 16
16
Utility Direct SW
command
Sensor Offsets Offsets of zero # # # # # # # #
ANGLE ALIGN : Angles of zero # # # # # # # #
REFERENCE FRAME: Angles of zero # # # # # # # #
Flip Sensor Axes: Enabled # # # #
Reset on CTS: Disabled # # # #
Sleep on Reset: Disabled #
# #
#
Filter On/Off Status:
AVG Filter (
AC
NARROW notch, moving
average of 4)
ADAPTIVE Filter (DC)
ALPHA_MIN
Table values
ALPHA_MAX
Table values
ON
ON
.02
.9
# # # #
# # # #
# # # #
# # # #
# # # #
#
# #
#
Prediction:
X,Y,Z,Az,El,Rl
Prediction Interval
All Disabled
0 ms
# # # #
# # # #
# # # #
# # # #
Data Request Mode: POINT #
# #
#
Data Record Type: POSITION/ANGLE #
# #
#
Report Rate: maximum -240 # # # #
Configurable Power-up Settings:
The following may be re-configured using the laserBIRD Utility.
Baud Rate Establishes the default RS232 communication rate for power-up.
Scale Sets the scale factor used by the laserBIRD to report the position of the sensor
with respect to the scanner. Valid values of 36 and 72, represent the full scale
position output in inches.
!
Note: When
two laserBIRDs
have operating
regions that
overlap, you must
re-configure the
'laserBIRD ID'.
See
Dual Scanner
Operation below.