background image

 

1

20-162 

PRO-162 2,000-Channel 
Handheld 
Trunking Scanner

 

 

 
Contents 
 

Thank you for purchasing your RadioShack 2000-Channel Handheld Trunking Scanner 
from 

RadioShack

Your handheld scanner is one of a new generation of scanners designed to track 
Motorola® Type I, Type II, hybrid analog systems, (such as Smartnet® and Privacy Plus®) 
plus M/A-COM EDACS® and EF Johnson LTR. Those systems are extensively used in 
many 800 MHz, 900 MHz, and UHF communication systems. 
 

• scanner   
• antenna 
• belt clip (2) screws 
• user’s guide 
• quick start guide 
• preprogrammed frequency guide 

 

Hypersearch, Hyperscan, and Adaptaplug are trademarks used by RadioShack

 

Corporation. 
Motorola, Smartnet, and Privacy Plus are registered trademarks of Motorola Inc. 
EDACS is a registered trademark of MA-COM Inc. 
LTR is a registered trademark of EF Johnson. 
 

The Basics 
your scanner’s features 

SCAN

/

 

— scans the stored channels and scans an active ID while trunking , or turn Signal Stalker 

 on and 

off. 

MAN

(Manual)

/MENU

 — manually enter a channel; enter the menu mode. 

SRCH

(Search)

/TUNE

— start a chain search, start a service search. search a specified frequency range; enter 

the fine tune mode. 

TRUNK/MODE 

— enter the Talk Group ID program mode; select the modulation for trunking system. 

 

WX

/

  — starts weather search; activates Skywarn function. 

PSE

(Pause)

/TEXT 

— stops and resumes searching; change from Program mode to Program Text Tag mode. 

BANK 

— enter the select bank menu. 

—Search and scan up and down a selected frequency range; selects options during programming; 

changes the ID location number while trunking. 
 

FUNC

(Function)

/A/a 

— let you use to various functions by pressing this key in combination with other keys; let 

you use to switch the small letter and capital letter.

 

PRI 

(Priority)

/ALERT

— sets and turns the priority function on or off; SAME weather alert on and off. 

L/O 

— lockout selected channels or skip specified frequencies during a search; lock out a selected ID while 

trunking. 

CL/CTCSS/DCS

 — Press 

CL

 to clear an entry; let use to turn on and off the CTCSS/DCS. 

Summary of Contents for PRO-162




































Reviews: