Radio Shack PRO-162, User Manual

Page: 8 / 35

8
174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265
266 271 274 306 311 315 325 331
332 343 346 351 356 364 365 371
411 412 413 423 431 432 445 446
452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606
612 624 627 631 632 654 662 664
703 712 723 731 732 734 743 754
copying/moving a frequency
If you want to copy/move a frequency to a channel, follow the steps below:
1. Press
ENT/PGM to put the scanner in programming mode. Enter the channel which
contains the frequency you want to copy or move.
2. Press
MAN to advance the channel.
3. Press and hold ENT/PGM during program mode.
4. Select the bank where you want to copy or move the frequency.
5. Press
ENT/PGM . The smallest empty channel number and “000.0000” appear. If there is
no empty channel, the scanner automatically selects the first channel of the bank.
6. Press
ENT/PGM to enter the frequency, “Delete Source Channel?” appears.
7. To moving a frequency, press ENT/PGM . Or to copying a frequency, press CL .
searching for and temporarily storing active frequencies
If you do not have a reference to frequencies in your area, use a chain, fine tune, or service
search (except weather search) to find a transmission.
Beyond the Basics
Notes:
• While doing a chain, fine tune, or service bank search, press • /DELAY if you want to turn
the delay on or off (see “delay”).
• While doing a chain, fine tune, or service bank search, press FUNC, then MENU if you
want the scanner to skip data signals (such as fax or modem signals) and search only for
audio (voice) signals to enter the menu mode and turn Data Skip Option to off (see
“skipping data signals”).
chain search
This feature lets you search through preset frequency ranges. You can also preset a range.
There are three modes within this feature: chain search mode, chain search pause mode,
and program band select mode.
The preset frequency ranges are:
Bank No. Frequency (MHz) Step (kHz)
0 25.0000-27.9950 5
1 28.0000-54.0000 5
2 137.0000 -174.0000 5