![background image](http://html.mh-extra.com/html/radio-shack/pro-162/pro-162_user-manual_779401019.webp)
19
You can lock out the log channels like normal channels.
Set
Logging
to
ON
to scan the log channels along with the normal channels. If you do not
want to scan the channels, set it to
OFF
.
The scanner stores signals found by the Signal Stalker I even the
Logging
function is
OFF
.
The frequencies in the log channels are deleted when the scanner is turned off.
3. Repeatedly press
or
to select the option you want, then press
ENT/PGM
.
•
Band Switch:
If you selected Band Switch, one of the following band names appears:
25-54 : VHF Low Band
108-137: AIR Band
137-174: VHF High Band 1
216-320: VHF High Band 2
400-512: UHF Band
764-956: 800MHz Band
Repeatedly press
or
to select the band you want to set, then press
ENT/PGM
.
4. Repeatedly press
or
to select
ON
or
OFF
, then press
ENT/PGM
.
5. When you select the option, press
CL
to exit the option mode.
6. Press
MENU
to exit the menu mode.
band meter for Signal Stalker
This meter allows you to see which band Signal Stalker is searching for. When a strong and
consistent signal is detected, this meter will rise up to Max. And the scanner is tuned to the
signal and shows up the band where the signal is detected.
However, there is a case that the scanner might not be able to catch the signal even if this
meter rises to MAX. It is because the signal might be out of range, it might be a locked out
frequency , or it might be a signal screened common pager frequency as the pager signal. If
you want to improve the performance when signal stalker is On (not in "ONLY Mode" ),
disable the band (see xx).
Note
: This feature is different from so-called SIGNAL STRENGTH METER using RSSI.
using Signal Stalker I
Note:
Turn off the data skip feature if it is on.
To turn on Signal Stalker I, turn
SQUELCH
fully clockwise, and then press
except in
WX search, program search range, or program mode.
appears. Every 2 seconds, the
scanner searches for frequencies in the range you specified in “Setting the Signal Stalker I
Options.”