5
3. Press
MAN
.
4. Press
FUNC
, then press
/BANK
or (Press FUNC, then press
) to advance the
channel with 0 MHz in next bank (or previous bank).
• If the channel with 0MHz is not, the first channel of the bank is selected.
• If you entered an in valid channel number, “Invalid Channel.” Appear.
appears and the
scanner beeps error tones. Enter a valid channel.
5. Use the number keys and
•/DELAY
to enter the frequency, including the decimal point
you want to store.
6. Press
ENT/PGM
to store the frequency into the channel.
Notes:
•
If you entered an invalid frequency in Step 5, “
Invalid Freq.
”
appears and the scanner
beeps error tones. Enter a valid frequency.
• If you entered a frequency in Step 5, which already exists on another channel, the
scanner beeps an error tone and displays that channel. Press
CL
to clear the display, or
press
ENT/PGM
to store the frequency in both channels.
• The scanner automatically rounds the entered number to the nearest valid frequency.
For example, if you enter 151.473 (MHz), your scanner accepts it as 151.475.
• After a transmission, the scanner automatically pauses for 2 seconds on this channel
before proceeding to the next active transmission. Press
•/DELAY
to turn the delay
function off or on. See “delay”). The scanner stores this setting in the channel.
7. To program the next channel in sequence, press
or
and repeat Steps 5 and 6.
Programming channels text tag
You can customize your scanner by storing text tags (up to 16 characters) for easy
identification of channel.
1. Press
ENT/PGM
to put the scanner in programming mode.
2. Enter the channel number where you want to store a text tag. If you make a mistake,
press
CL
repeatedly until the display is cleared.
3. Press
MAN
to advance the channel.
4. Press
TEXT
to put the scanner in program channel text tag edit mode. The cursor
appears.
5. Press ? or ? to move the cursor in the right or the left. Press the number key and
decimal key to enter the letter. (See “text input chart”).
6. Input the word (Public Ch) and press
ENT/PGM
to store.
Programming bank text tag
You can customize your scanner by storing text tags (up to 16 characters) for easy
identification of bank.
1. Press
ENT/PGM
to put the scanner in programming channel mode.
2. Enter the channel number where you want to store a text tag. If you make a mistake,
press
CL
repeatedly until the display is cleared.
3. Press
MAN
to advance the channel.
4. Press
FUNC
, and then press
TEXT
to put the scanner in program bank text tag edit
mode. The cursor appears.
