26
Note:
If one or more of the IDs you stored are incorrect,
Invalid ID
appears and the
scanner beeps several times. To correct the entry, delete at least one of the incorrect IDs.
Motorola talk groups
To enter a Type 2 Talk Group ID:
1. Enter the ID you want to store by using the keypad.
2. Press
ENT/PGM
.
To enter a Type 1 ID:
For a Type I ID, enter the block number, fleet number and subfleet number to form the talk
group ID number.
1. Enter the ID you want to store by using the keypad (ID = Block Fleet
•/DELAY
+ Subfleet number).
2. Press
ENT/PGM
.
EDACS (Ed) talk groups
AFS (‘Agency-Fleet-Sub fleet’) is the numbering format used in the scanner to display and
enter EDACS talk groups. The scanner shows EDACS talk groups in AFS format and can
also work in decimal format. (See "selecting the EDACS(Ed) talk group ID format"). AFS
allows you to enter full or partial EDACS Talk Group IDs.
To enter a full EDACS ID:
1. Enter the Agency number.
2. Press
•/DELAY
to enter the dash.
3. Enter the fleet number and subfleet number.
4. Press
ENT/PGM
.
entering EDACS partial talk groups
You can enter partial group numbers in an EDACS talk group. By entering only the desired
portion of a group, you can select either 128, 8, or 1 talk group. For example, you might
program every talk group in a police department by pressing just four keys.
Note:
You cannot use partial talk groups in decimal mode. (See “selecting the EDACS talk
group ID format”).
You can program a specific talk group such as 01-011 into the scan list memory. In AFS
mode, you can program the talk groups for an entire agency by pressing corresponding
keys.
For example:
You Press
To Scan
0 1 . ENT
all 01 groups
0 1 . 0 1 ENT
all 01 talk groups within the 01
agency
To enter a Partial EDACS ID: