93
4. Right click in the right window and select paste.
5. The wires will be copied to the folder.
6. To move an item just select Cut in step 3 instead of copy.
Deleting items
The wire or Preprocess cannot be called up in a part, if it is you must first change or delete the part. If you delete
a wire or preprocess that is used in a part, you will get an error when you try to load the part to run.
The Part cannot be called up in a job, if it is you must first change or delete the job. If you delete a part that is
used in a job, you will get an error when you try to load the part to run.
1. Select the folder and sub folder the data is located in. (example, Main - Wires)
2. Select the items to delete, right click and select delete.
Using the Library for wires, instead of the current folder.
You can choose to run the machine in a mode where the wires displayed in the drop down of the main menu are
from a library instead of the particular folder you are in. This way you can use the same wire list no matter what
folder you are in. The only problem with this mode is that when you add new wires or make changes they will not
show up in any folder. This means you cannot export or backup these new wires or changes. That’s why it is
recommended that when adding or changing wires, you follow these steps.
1. Turn off library mode
2. Select to work in the Main folder. This will keep all your wire info in
3. Add the new wire or make changes.
4. Go to the data organizer – Main – Wires
5. Select the wire you added or changed.