37
Creating or Editing a Part Program
A “Part Program” is comprised of several pieces of data and database selections which are bought together under
the “Part” ID.
The
UNITY
interface software is a
database driven program
where you define a part or article. When choosing a
part program from the drop down you are actually making a selection from the
Assemblies database
. Normally
the name of the part would be your company’s part number for this particular assembly.
A part program contains the following information.
A.
Part Properties
. – details stored with the part
B.
Wire Properties
. – Wires database selection
C.
Lead / Tail Process Setup
. – Process database selection.
D.
Crimping setting
. – TU10Crimp database selection
E.
Preprocess setup. –
Preprocess database selection.
Any database entry that you select can be edited from the main run screen. New entries can also be added from
the main run screen
Creating a new part program
Before creating a new part program first make sure you select and load a part that is simular to the new one you
are going to make. This is because all the informtion is copied from the currently selected part to the new part.
To enter the part properties screen click on the wire icon next to the dropdown
To create a new part program click new, and enter the name.
A
E
C
D
C
D
B
