Artnix ANX-16480, Manual

Page: 99 / 110

-
99
NETWORK VIEWER INSTALLATION
11.2.1 Add a new site information
Click the “Select a DVR” button to display the DVR List on the screen.
Fill out Type, DVR Name, IP address and Password to add the desired units into the DVR
information box, and then click on the “Add” button to save the information.
11.2.2 Change the site information
In case of any changes, type new information into the box after selecting the desired DVR on
the list.
Click the “Change” button to save the changes.
11.2.3 Delete the site information
Select the desired DVR on the list, and then click the “Delete” button to erase the information on
the list.
11.2.4 Connect to a DVR.
Select the desired DVR that you want to connect in the “DVR list”.
Select the necessary Information according to the connection type.
Click the “Connect” button or to access the DVR and the images screen will be displayed.
11.2.5 Viewer Screen
Click the button to see the full view window with control bar.
Alarm Status
LIVE
NOTE
You can connect 16 x 16(16 users x 16 units) windows at the same time but Master viewer is only
one by user.
PASSWORD
- The default password is either of 11111111(Master password) and 22222222(Supervisor password).
- To change the password, please refer to the PASSWORD setup in Chapter 6 Set up MENU.
- The password must be the same as the registered site password.