USER’S MANUAL
27
OPERATION
5.2.4.4 EVENT SEARCH
At the SEARCH menu;
Move the cursor to EVENT SEARCH using or button.
Press the ENTER button and the EVENT SEARCH menu screen appears.
Select the desired HDD ID using the (-) or (+) button.
Move the cursor to CHANNEL using the or button and select the desired channel using the
(-) or (+) button.
Move the cursor to EVENT using the or button and select the event type to search using
the (-) or (+) button.
Move the cursor to the desired position of SEARCH TIME using the , , , buttons, and
then set up the desired time using the(-), (+) buttons.
(Or turn the JOG DIAL to search the event list.)
Press the ENTER button or turn the JOG DIAL, and the event list searched appears.
When the event list appears on the screen, select the desired list using , buttons or JOG
DIAL and press the ENTER button for the playback.
- When video loss is detected, up to five seconds of
pre-recording
data is stored on the HDD and the
details will be listed in the EVENT LIST. The beep sounds and the LED of the ALARM RESET button will
flicker. Press the ALARM RESET button to remove this signal.
- When the unit receives a signal from the sensor input, DVR begins to record the input data according
to the PRE/POST TIME in the RECORD setup and the details will be listed in the EVENT LIST.
CAUTION
If the internal HDD(s) is initialized, all of the event images will be deleted.
When the unit is in normal recording status, the pre-recording will not be executed.
Summary of Contents for ANX-16480
Page 9: ...9 LOCATION AND CONTROL Chapter 3 Location and Control 3 1 FRONT PANEL CONTROLS 3 8...
Page 12: ...USER S MANUAL 12 INSTALLATION Chapter 4 Installation 4 1 TOTAL CONNECTION LAY OUT...
Page 41: ...USER S MANUAL 41 OPERATION You can click the below keys on the MENU screen with a mouse...
Page 91: ...91 HDD INSTALLATION PROCESS Chapter 9 256 Camera Integration system Block Diagram...
