Artnix ANX-16480, Manual

Page: 43 / 110

43
MENU
6.1.4 EVENT
Select a kind of EVENT using the (-), (+) buttons or jog dial.
If you want to select all kind of event, choose “ALL” and if you don’t want event recording, choose
“OFF”.
The default is “ALL”.
6.1.5 PRE RECORD TIME
Select the desired time for pre-recording using the (-), (+) buttons or jog dial.
When video loss, alarm or motion is detected, the DVR will store pre-recorded data during the
selected time.
The pre-recording time can be set from 0 second to 5 second and the default is “5”.
6.1.6 POST RECORD TIME
Select the desired time for post-recording using the (-), (+) buttons or jog dial.
When video loss, alarm or motion is detected, the DVR will store post-recorded data during the
selected period.
The post-recording time can be set from 0 second to 60 second and the default is “10”.
6.1.7 IMAGE QUALITY
Select the desired image quality using the (-), (+) buttons or jog dial.
There are 3 kinds of image quality.
Please refer to chapter 6.3 RECORD.
6.1.8 AUDIO RECORD
Select “ON” or “OFF” using the (-), (+) buttons or jog dial to record audio.
6.1.9 REMOTE CONTROL ID
Select the desired remote controller ID using the (-), (+) buttons to record audio.
Please refer to chapter 6.5.6 REMOTE CONTROL ID.
NOTE: The pre- and post- recording is not valid in normal recording mode.