Artnix ANX-16480, Manual

Page: 59 / 110

59
MENU
Select the audio recording channels using the (-), (+) buttons or jog dial.
Press the AUDIO SEL button and then press the desired channel button on front panel after
saving this menu and you can hear the selected channel audio.
6.3.5 REPEAT RECORD
At the RECORD menu,
Move the cursor to the REPEAT RECORD using , buttons.
Press the ENTER button when the cursor is on the REPEAT RECORD and the following screen
appears.
Use the (-), (+) buttons or jog dial to set “ON” or “OFF”.
It is possible to set a point of time to work the REPEAT RECORD ALARM.
Move the cursor to ”REPEAT RECORD ALARM” using , buttons and then select the desired
value using (-), (+) buttons or jog dial.
The value is from 5% to 10%.
To exit this REPEAT RECORD menu, press the ESC button.
6.3.6 PLAY MODE
At the RECORD menu,
Move the cursor to the PLAY MODE using , buttons.
Select the PLAY MODE using the (-), (+) buttons or jog dial.
ON: The recorded data will be overwritten when it is a point of time to work the REPEAT RECORD.
REPEAT RECORD ALARM is the rest capacity of the HDD.
If you set “REPEAT RECORD ALARM” to 5%, alarm will work when the rest capacity of the HDD is 5%.
NOTE : AUDIO CHANNEL during live or playback
MPEG4 16480, 8240, 4120D are 8CH Audio inputs and the others are 4CH Audio inputs.
AUTO : This DVR will automatically select playback in frame(two fields) or field to avoid
moving artifact.(Recommended)
FRAME : It will playback images in frame mode which is useful for recorded images in high frame rate.
This may occur moving artifact with recorded images in low frame rate.
FIELD : It will playback images in field mode. This reduces the resolution, but is suitable
for recorded images in low frame rate.