Home
/
artisan
/
TRACKPOINT 3 4211A
/
Operation And Maintenance Manual

artisan TRACKPOINT 3 4211A, Operation And Maintenance Manual

Share

Page: 211 / 253

artisan TRACKPOINT 3 4211A Operation And Maintenance Manual Download Page 211

TRACKPOINT 3

APPENDIX C

C-1

APPENDIX-C

WARRANTY

STATEMENT

On standard catalogue products, ORE Offshore warrants the products delivered under this contract
to be free from defects in material and workmanship at the time of delivery to the EXW point speci-
fied in this order, its liability under this warranty being limited to repairing or replacing, at ORE Off-
shore’s option, items which are returned to it prepaid within twelve (12) months from delivery to
the BUYER and found to ORE Offshore’s satisfaction, to have been so defective. On services, ORE
Offshore warrants that all work performed by its employees will be done in a workmanlike manner,
ORE Offshore’s liability under this warranty is limited to remedying at its expense any work found
to ORE Offshore’s satisfaction not so performed, provided however, ORE Offshore is notified of any
claims within three (3) months from the date work is performed. Any products manufactured by
others and resold by ORE Offshore shall bear the warranty of the original manufacturer, to the ex-
tent that such warranties may be legally transferred, assigned and passed on to BUYER. ORE Off-
shore assumes no responsibility for the performance of products manufactured to BUYER’s design
or specification, nor for defects in raw material, parts, or subassemblies furnished by BUYER or his
agents.

This warranty is in lieu of, and excludes any other warranties, whether statutory, expressed or im-
plied, and the goods are accepted by BUYER with that understanding. ORE Offshore MAKES NO
OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND SPECIFICALLY, EDGETECH MAKES NO WAR-
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ORE Offshore’s liability
on any claim of any kind, including negligence, for loss or damages arising out of, connected with
or resulting from this AGREEMENT, or from the performance or breach thereof, or from the manu-
facture, sale, delivery, resale, repair or use of any GOODS or services covered by or furnished un-
der this AGREEMENT shall in no case exceed the price allocable to the item or service or part
thereof which gives rise to the claim. In the event ORE Offshore fails to manufacture or deliver
GOODS required to be manufactured or delivered hereunder, or manufactures such GOODS in a
defective manner, ORE Offshore’s exclusive liability and BUYER’s exclusive remedy whether at law
or in equity shall be the release of BUYER from the obligation to pay the purchase price. Any prod-
uct or service repaired or replaced under this warranty shall be warranted for the unexpired portion
of the original warranty period only.

IN NO EVENT SHALL ORE Offshore BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES.

«
...
209
210
211
212
213
...
»

Summary of Contents for TRACKPOINT 3 4211A






























































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands