artisan TRACKPOINT 3 4211A, Operation And Maintenance Manual

Page: 155 / 253

TRACKPOINT 3 OPERATION
3-92
3.7.4.6 “STANDARD-EC” DATA OUTPUT FORMAT
Applicable To: TrackPoint 3 and TrackPoint 3P (Models 4450A, 4430C)
Message Name: STANDARD
TRACKING DATA MESSAGE FOR FORMAT "STANDARD-EC"
BYTE LENGTH DATA WORD REPRESENTATION RANGE UNITS
1 1 TARGET NUMBER ASCII 1-9 N/A
2 1 SPACE ASCII SPACE CHARACTER N/A
3-4 2 HOURS ASCII 00-23 HOURS
5 1 COLON ASCII COLON CHARACTER N/A
6-7 2 MINUTES ASCII 00-59 MINUTES
8 1 COLON ASCII COLON CHARACTER N/A
9-10 2 SECONDS ASCII 00-59 SECONDS
11 1 SPACE ASCII SPACE CHARACTER N/A
12-14 3 COMPASS HEADING ASCII 0-359 DEGREES
15 1 SPACE ASCII SPACE CHARACTER N/A
16-20 5 TARGET BEARING ASCII 0.0-359.9 DEGREES
21 1 SPACE ASCII SPACE CHARACTER N/A
22-28 7 SLANT RANGE ASCII 0.0-10000.0 METERS
1
29 1 SPACE ASCII SPACE CHARACTER N/A
30-37 8 X ASCII +/- 10000.0 METERS
1
38 1 SPACE ASCII SPACE CHARACTER N/A
39-46 8 Y ASCII +/- 10000.0 METERS
1
47 1 SPACE ASCII SPACE CHARACTER N/A
48-54 7 Z ASCII 0.0-10000.0 METERS
1
55 1 SPACE ASCII SPACE CHARACTER N/A
56-63 8 TELEMETRY ASCII +/- 99999.9 UNITS
64 1 SPACE ASCII SPACE CHARACTER N/A
65-66 2 WARNING AND ERROR
CODE ASCII Null-99
2
N/A
67 1 CARRIAGE RETURN ASCII CARRIAGE RETURN CHARACTER N/A
68 1 LINEFEED ASCII LINEFEED CHARACTER N/A
NOTE 1: The Slant Range X,Y & Z data can either be in meters, yards or feet. See SYS-
TEM/RS232 UNITS. Leading zeroes following the ones digit are suppressed and re-
placed by spaces (except for the time).
NOTE 2: Error Code 0 = Null Character
Example:
O.R.E. TRACKPOINT II Model 4410 Rev # 9.05 15 Oct 97 15:32:51
# TOD HDG BRG S.R.(m) X (m) Y (m) Z (m) TEL ERR
1 15:32:53 359 356.1 196.6 -11.5 169.4 100.0 0.0 50