artisan TRACKPOINT 3 4211A, Operation And Maintenance Manual

Page: 150 / 253

TRACKPOINT 3 OPERATION
3-87
TARGET BEARING: The TARGET BEARING output in degrees is a relative bearing from the
Hydrophone to the target. The target bearing is corrected for the entered hydrophone offsets,
when target is referenced to the pitch roll center of the vessel or if Antenna Offsets are entered, it
is corrected again to the Antenna offset point.
X, Y, Z: Horizontal position and depth of Target output in Meters.
HEADING: NMEA or ANALOG.
PITCH: Pitch Angle [ Pitch of vessel, 0 is horiz, bow up is positive Pitch]
ROLL: Roll Angle [ Roll of vessel, 0 is horiz, port up is positive Roll ]
TEMPERATURE: The TEMPERATURE is the value as measured at the Hydrophone by the tem-
perature sensor. In degrees Celsius.