ARRI ARTEMIS 2, User Manual

Page: 22 / 93

Safety Instructions 22
Warning Symbols and Product Labels
General warning sign Warning of electrical voltage
Warning of hot surfaces Warning of hand injuries
Warning of the risk of crushing Warning of obstacles on the ground
Please read all instructions care-
fully before using the product for
the first time.
Direct Current symbol found on elec-
tronics requiring or producing DC
power
6.2 General Safety Instructions
WARNING
Operating the TRINITY 2 in case of obvious damage
Risk of electric shock and fire hazard caused by short circuit.
Do not use the system if electrical lines or housing are visibly damaged.
Operate the system using only the type of power source indicated in the manual.
Unplug the power cable by gripping the power plug, not the cable.
Do not operate the system in areas with humidity above operating levels or expose it to water or
moisture.
Do not get the system wet.
Do not lay cables over sharp edges (e.g. sheet metal, profile or other cut edges). Damaged
cables can cause electric shock, short circuit or fire.
Do not remove or deactivate any safety measures from the system (incl. warning stickers or paint
marked screws).
Repairs may only be carried out by authorized ARRI service partners.
WARNING
Falling TRINITY 2 components
If the TRINITY 2 components is inadequately built up or assembled, it can fall down and
cause serious injuries and damage to the camera accessories or property.
Installation and operation may only be carried out by trained personnel who are familiar with the
system. Observe accident prevention regulations.
Do not place the TRINITY 2 on an unstable trolley or hand truck, stand, tripod, bracket, table or
any other unstable support device.
Always place the TRINITY 2 on dedicated support devices.
Secure the TRINITY 2 against falling and tipping over. Observe the general and local safety
regulations.