28
Rev 2, 18.06.19
Your Maturmeat® has a tray, which col-
lects excess water moisture. The tray
should be emptied daily to avoid over-
flowing onto your floor creating the pos-
sibility of unsafe or unsanitary conditions
in your workplace.
DANGER
Slip Hazzard
Overflow from the drain tray as a result
of neglecting to empty it can result in
serious injury or death.
CLEANING MATURMEAT® continued
EMPTYING THE DRAIN TRAY
3.13
Condensing Unit:
All condensing units require regular main-
tenance. The purpose of the condenser
is to release absorbed heat; If the con-
denser coils are clogged with dirt or the
fins are bent it restricts or block air flow
through the coils and interferes with the
heat exchange. This causes the system to
work harder and shortens the life of your
compressor. Please check your condens-
ing unit regularly. Please unplug the unit’s
power or shut down power to the unit if
connected directly to an electrical panel
before attempting to clean. You can use
compressed air to clear away and loose
dirt or dust that may impair normal use.
A general preventative maintenance schedule must be established to protect your Maturme-
at®. A copy of the general preventative maintenance schedule (MOD_001 ENG) can be found
inside the unit along with this user manual. Based on tests performed at a factory level, It is highly
recommend that this maintenance occur at regular intervals once every 3 months, annually.
NOTE
DANGER
Shock Hazzard
Before attempting to clean any part the unit, unplug the unit’s power or shut down power to
the unit if connected directly to an electrical panel, failure to do so can result in serious injury or
death.
Summary of Contents for Maturmeat 100
Page 1: ...1 Rev 2 18 06 19 Maturmeat Manual...
Page 56: ...56 Rev 2 18 06 19...
