Arjohuntleigh Maxi Sky 2, Maintenance And Repair Manual

Page: 99 / 140

6 - 70
-
DO NOT MOVE YOUR LASER.
LIFT the WLT trolley no more than 50 mm (2 in) from the floor to
make sure it no longer touches it.
-
Using a measuring tape, measure between the track and the laser
line at every load test point, always taking the same reference point
(either the top or the bottom of the track).
-
With the measurements mentioned above, fill the corresponding
column (height unloaded) in the weight load test form
(001-11760-EN).
REGULATORY AUTHORITIES REQUIRE THE ARCHIVING
OF WEIGHT LOAD TEST DOCUMENTS FOR FUTURE
CONSULTATION.
NOTE
BE SURE TO USE THE SAME MEASURING TAPE THROUGH-
OUT, AS DIFFERENT MEASURING TAPES MAY HAVE VARYING
LOOSENESS IN THEIR TAPE END HOOKS.
NOTE
If using the ceiling lift:
-
Connect the ceiling lift strap to the WLT trolley using a carabiner.
NEVER STAND WITH YOUR FEET UNDER THE TROLLEY
DURING THE WEIGHT LOAD TEST.
WARNING
001-15697 rev
. 5