5 - 2
INITIAL START-UP PROCEDURE
-Turn the lift ON by pushing on the red button.
-Make sure to have the right SWL. Compare the data displayed on
the LCD screen with the SWL sticker on the lift.
Adjust date and time by using the Up and Down button, press
to
confirm value
When the lift is started for the first time, follow the next steps.
-Cut the tie wrap around the red button.
-Install Hand control (Refer to “REMOVING THE UP/DOWN MO-
TOR” on page 52).
Date
(yy-mm-dd)
11-01-01
Blinking digits
showing selected
parameter
Increase value
Legend
Enter value /
Go to next parameter
Increase value
Time
(hh:mm)
00:00
Date
(yy-mm-dd)
11-01-01
Date
(yy-mm-dd)
11-01-01
Time
(hh:mm)
00:00
Date
(yy-mm-dd)
11-01-01
Exit to
Normal
mode
Start
ADJUSTING DATE AND TIME
Increase value
Enter value /
Go to next parameter
Decrease value
Date
(yy-mm-dd)
11-01-01
Blinking digits
showing selected
parameter
For MS2 Plus Initial Start Up, refer to MS2 Plus 001-31229-EN.
001-15697 rev
. 3
Summary of Contents for Maxi Sky 2
