Arjohuntleigh Maxi Sky 2, Maintenance And Repair Manual

Page: 26 / 140

5 - 3
CUSTOMIZING
-To access the Customizing section, press and hold the button
for 3 seconds.
-Select “customizing” then press to confirm.
-Press Up/Down button to scroll through the Customizing menu.
-Press button to enter and accept value.
Parameters available in the customizing menu
Parameter Description Settings (default in bold character)
Motor speed Displacement speed along the rail 10 cm/s (4 in/s)
15 cm/s (6 in/s)
20 cm/s (8 in/s)
RTC/RTH
function
RTC/RTH options
Disable , auto, ,
If RTC/RTH function is set at auto, you need to bring the
unit to the charging station, so the lift will recognize its
location.
For software version 2.0 and 2.1, each time the lift is
turned off, it forgets the charging station location. When
you turn the lift back on, you need to bring it back to the
charging station. For software versions 2.2 and up, even
if the lift is turned off, it will remember the charging sta-
tion’s location.
PPP function Enabling / Disabling PPP Disable , enable
Strap length RTC/RTH mode strap unwinding
duration
1 to 30 sec. ( 1 sec. ) for software version 2.0.X and 2.1.X
13 to 152 cm (5 to 60 in) from software version 2.2.X
Has no effect when RTC/RTH is disabled
Detection time Maximum time allowed finding Charger
or PPP station
0,5 to 5 min. ( 1.5 min. )
Has no effect when both RTC/RTH and PPP functions
are disabled
Ready state Lift standby duration before entering
sleep mode
1 to 20 min. (
10.5 min.
)
Hoist led Enabling / Disabling green LED Disable, enable
Date/time Actual date/time Depends on value
Set at initial start-up
( 11-01-01 00:00 )
Dual / Single mode
(only for MS2 Plus)
Switching Between Modes Dual / Single
Back Exit Customizing Mode
Customizing
Back
Monitoring
Monitoring
Back
Customizing
For MS2 Plus the customizing is done on the leading ceiling lift and by doing so the parameters will be set in both the
leading and driven ceiling lifts. For example, if the Ready state setting is changed from 10.5 to 15 minutes, both ceiling
lifts will adopt the changes simultaneously.
Also, parameters Motor Speed , RTC/RTH, PPP functions and Detection Time are found in the menu, customizing them
will have no impact since these functionalities have been disabled within the Maxi Sky 2 Plus.
001-15697 rev
. 3