Arjohuntleigh Maxi Sky 2, Maintenance And Repair Manual

Page: 65 / 140

6 - 36
-Install the proper jumper to have the appropriate SWL.
-Make sure to have the same SWL on the screen at start-up, on the
display sticker and on the rail system. If not, install the connector for
the lowest safe working load.
-Turn the lift ON by pushing on the red button and perform a functional
test (refer to “FULL FEATURE TEST”, page 4-4 - Item 1, 5
and 6 for procedure).
-NO JUMPER EQUALS TO 265 LBS (120 KG)
-ORANGE JUMPER EQUALS TO 440 LBS (200 KG)
-RED JUMPER EQUALS TO 600 LBS (272 KG)
NOTE
Refer to section “INSTALLING THE TOP CABIN”, page 6-26
-Connect flat cable (1)
-Connect the hand control connector (2)
-Connect Limit Kit connector (3)
1
3
2
FROM SOFTWARE 2.2.X AND HIGHER, IF THE REPLACEMENT
BOARD ALREADY HAS DATA INSIDE ITS MEMORY, AT THE
STARTUP, THE SYSTEM WILL ASK YOU TO CONFIRM THE SE-
RIAL NUMBER OF THE LIFT.
NOTE
-The serial number of the lift is located on the product name plate on
the top cabin.
-Select the serial number of the lift and press the button.
-Confirm your choice by selecting “yes” and pressing on the
button . Note that “back” can be used to return to the serial number
selection window.
001-15697 rev
. 5