Subject to change · V 4.06.19 · EN
Page 7
www.argo-hytos.com
2.6
General safety instructions
›
Observe the valid regulations for accident prevention and environmental protection.
›
Observe the safety regulations and requirements of the country in which the product is used / applied.
›
Only use ARGO-HYTOS products that are in technically perfect condition.
›
Observe all instructions on the product.
›
People who assemble, operate, disassemble or maintain ARGO-HYTOS products may not do so under the influence of alcohol,
other drugs or medications that affect the responsiveness.
›
Only use manufacturer-approved accessories and spare parts, in order to prevent personal danger due to unsuitable
spare parts.
›
Observe the technical data and ambient specifications specified in the product documentation.
›
If unsuitable products are used or installed in safety-relevant applications, unintended operating states can occur in the application,
which can cause personal injury and / or material damage. Therefore only use the product in safety-relevant applications if this use
is expressly specified and permitted in the product‘s documentation.
›
You may only put the product into operation, when it has been established that the final product (e.g. a machine or system), into
which the ARGO-HYTOS products are installed, complies with the country-specific regulations, safety regulations and standards of
the application.
2.7
Product and technology related safety instructions
CAUTION
Laser
The OPCom Portable Oil Lab contains a laser sensor that is classified for intended use as a class 1 laser according to DIN EN
60825-1:2001-11.
In reasonably foreseeable circumstances, the accessible laser radiation is not dangerous.
With direct exposure to class 1 lasers in the upper power range, injury, such as blinding, impairment of color vision and
disruption, cannot be ruled out.
