Subject to change · V 4.06.19 · EN
Page 17
www.argo-hytos.com
7.3
Electrical connection
DANGER
Risk of death
Danger of electrical shock.
The electrical connection of the portable particle monitor may only be performed by a qualifi ed electrician.
WARNING
Faulty power supply
Risk of death - injury
Always consider the country-specifi c prescriptions.
Power supply according to EN50178, SELV, PELV, VDE0100-410/A1.
The OPCom Portable Oil Lab works with battery as well as with connected power.
In battery mode, the cells, with a total capacity of 6.900 mAh, supply the necessary power.
They are charged by connecting a power cord to the charging connection.
Once the power has been connected to the OPCom Portable Oil Lab, this is switched on independently without having to press the
power button.
Fig. 12: Electrical connection
Preparing the network operation
›
Insert the polarity-proof plug with the blue locking ring (2) into the charging port of the switched off OPCom Portable Oil Lab and
screw it down.
›
Plug the "cold-device plug" (3) (according to IEC60320-C13) into the power supply (1).
›
Connect the power plug (4) to the local power supply.
1
2
3
4
