Subject to change · V 4.06.19 · EN
Page 33
www.argo-hytos.com
The respective value can be selected using the or keys.
Press the button to return to the selection print menu.
The parameters can be selected with the button and deselected again. Selected parameters are marked with a small x.
This parameter, which describes the oil state, thus appears on the short print.
The respective value can be selected using the or key.
Confirm the selection by pressing the button.
Press the button to return to the system setup menu.
The following parameters can be selected:
9.2.5.5 Print selection
In this menu you can select the data to be displayed on a short print.
Here, the selectable parameters are divided according to their function into:
Oil condition
Here, parameters can be selected which describe the oil condition.
