Subject to change · V 4.06.19 · EN
Page 25
www.argo-hytos.com
By pressing the or button, you select the desired menu item.
By pressing the button, you return to the start screen.
Automatic mode
The automatic mode can be switched on or off by setting a check mark with the button.
The corresponding mode is indicated by an
"M“
(manual mode) or
"A“
(automatic mode) in the value display (see Chapter 9.2.1.
"Switching on the device").
Pump measurement
Press the key to start a measurement using the pump.
The corresponding mode is indicated by the symbol in the value display.
A progress bar graphically displays the progress of the measurement.
High pressure measurement
The key is used to start a measurement with high pressure, i.e. without using the pump.
The corresponding mode is indicated by the symbol
"P“
in the value display.
A progress bar graphically displays the progress of the measurement.
9.2.3 Measurement quick menu
9.2.4 Memory quick menu
By pressing the or button, you select the desired menu item.
By pressing the button, you return to the start screen.
Printing (short)
After selecting this option, press the button to print a filtered selection.
The parameters of the last data record defined in "System Settings“ (Chapter 9.2.5.3 "System settings“ / "Selection Print“) are
printed.
Print (all)
After selecting this option, press the key to print all parameters of the last record.
Copy to SD
All stored values are copied to the SD card, if an SD card is inserted.
Clear memory
Press the button in order to clear the internal memory of the device.
The progress of the erasure process is represented by means of a progress bar.
After successful completion of the erasure process, the message "Successful" appears and the display automatically returns to the
measuring menu.
