Subject to change · V 4.06.19 · EN
Page 23
www.argo-hytos.com
9.2.1 Switching on the device
The following data are shown on the display:
Temperature
T
[°C]
Relative oil humidity RH
[%]
ISO
4 μm, 6 μm, 14 μm (according to ISO 4406: 1999)
The mode icon at the bottom right shows the current function mode of the device.
›
If an "M“ is displayed, the device is in manual mode, which means that the measurement must be started automatically.
›
If an "A“ is displayed, the device is in automatic mode, which means that the measurement is started automatically.
The setting for this mode is explained in Chapter 9.2.3 "Measurement quick menu“.
In case of battery operation, the current charge of the battery cells is displayed with a status bar:
When the device is plugged in, the charging sign is displayed.
If necessary - if the bar decreases - a power supply must be connected (see Chapter 7.3 "Electrical Connection“).
The symbol shows, that a warning or note has occured during the last measurement.
The warnings can be taken from the main menu - sub-item "Memory". The meaning of the notes / warnings is explained in Chapter
9.2.5.1.
To turn on the device, press the button and hold it down until the standby signal lights up.
The welcome screen will appear:
During a short initialization phase, the display shows the version screen, which provides information on the implemented software.
After the device has been initialized, the following values are displayed:
