Subject to change · V 4.06.19 · EN
Page 35
www.argo-hytos.com
Here you can adjust the brightness of the display background lighting in %.
Use the or button to select the item to be changed.
Use the or button to raise or lower the values.
Pressing the button returns you to the display settings menu without accepting the settings.
The settings are set by pressing the button.
Here, the display can be configured so that the lightning switches off automatically after a certain time.
In addition, the brightness of the lightning can be adjusted.
The automatic brightness setting of the display can be selected with the key by setting a check mark.
Use the or buttons to select the menu items.
Press the button to return to the system setup menu.
Defined parameters
Here, in the device predefined (stored) parameters can be selected.
9.2.5.6 Display
Confirm the selection by pressing the button.
Press the button to return to the selection print menu.
The indication of the defined parameters thus appears on the short print.
