Subject to change · V 4.06.19 · EN
Page 38
www.argo-hytos.com
The software LubMon PC
l
ight
and LubMon Config can be downloaded from the website www.argo-hytos.com.
The components are to be prepared as follows:
Software installation LubMon PC
light
/ LubMon Config
1. Unpack the LubMonPClight.zip or LubConfig.zip file on your computer.
Data acquisition via USB
3. Connect the USB cable with the USB-B connector to the portable particle monitor.
4. Connect the USB cable with the USB-A connector to your computer. When connected to the computer, a new virtual COM port
is created. If necessary, you can check the assignment of the virtual COM port in the Windows Device Manager.
5. LubMon PC
light
or LubMon Config can be started by double click on the LubMonPClight.exe or LubMonConfig.exe file. Select the
previously installed COM port in the settings of LubMon PC
light
.
LubMon PC
light
LubMon PC
light
is used for continuously reading and displaying the measurement data of the OPCom Portable Oil Lab. A
selection of the measurement data appears on the left side of the window. On the right side of the window, the data can
be visualized in two diagrams.
Please note that the data of the OPCom Portable Oil Lab are only updated after the set measuring time has elapsed.
LubMon Config
LubMon Config is used for a unique readout of the current measured data (no continuous representation) and for readout of the
memory as well as for configuring the OPCom Portable Oil Lab.
For a detailed description of the two programs please refer to the respective manual.
11. Software
