Arctic Cat Prowler 700i HDX 2015, User Manual

Page: 37 / 94

Controls 4
37
4. For setting the minute display: press centre button (4) again. Then, press left-
hand button (6) or right-hand button (5) repeatedly until the desired number of
minutes is displayed.
5. To return to the normal gauge function: press centre button (4) again.
Display of operating hours counter / odometer / trip meter / speed / revolutions /
time of day
(2) – Depending on the selected function, it will display the operating
hours of the engine, the total number of kilometres driven with the vehicle, the number
of kilometres of a leg, the speed, the revolutions, or the time of day.
Toggling between the display modes:
1. Press and release centre button (4) repeatedly until the desired mode is dis-
played.
Resetting the trip meter:
1. Press and release centre button (4) repeatedly until the desired mode "Trip
meter" is displayed.
2. Press and hold centre button (4) until the trip meter displays "0".
Setting the clock:
1. Press and release centre button (4) repeatedly until the desired mode "Clock" is
displayed.
2. Press and hold centre button (4).
3. Proceed as described in "Display of speed / revolutions / time of day (1)".
NOTE
If a function is already displayed in the top display area (1), it cannot be dis-
played in the centre display area (2), too.
NOTE
The operating hours counter starts only after an engine speed of more than
500 rpm is reached.
NOTE
The operating hours counter and the odometer cannot be reset to zero.