Arctic Cat Prowler 700i HDX 2015, User Manual

Page: 35 / 94

Controls 4
35
Toggling between the display modes:
1. Press "M" button (10) repeatedly until the desired mode is displayed. Around
2 seconds after releasing the "M" button, the digital display will return to the full-
screen display.
Odometer / trip meter (11) – The odometer measures the total number of kilometres
driven with this vehicle and cannot be reset. The trip meters are used to measure dis-
tances or legs and can be reset.
Toggling between odometer (ODO) and trip meter (TRIP) display:
1. Press "M" button (10) repeatedly until the desired display appears.
Resetting trip meters:
1. Keep "M" button (10) pressed when the trip to be deleted is displayed.
"S" (Set) button (12) – Using the "S" button, you can toggle between speed indicator
and revolutions indicator.
Clock / operating hours counter (13) – The clock is set to the 12 hour format. The
operating hours counter displays the total operating hours of the vehicle and cannot
be reset to zero.
Setting the clock:
1. Turn ignition key into position RUN and press "M" button (9) repeatedly until the
clock or the operating hours counter (13) is displayed.
2. Press and keep "M" button (10) pressed until the clock indicator flashes.
3. To set the minute display, press the "M" button (10) repeatedly until the desired
number of minutes is displayed.
4. To set the hour display, press the "S" button (12) repeatedly until the desired
number of hours is displayed.
Gear indicator (14) – Displays the gear engaged.
Differential lock indicator (15) – The LOCK indicator appears when the differential
lock is activated.
NOTE
If nothing is entered for approximately 4 seconds, the gauge will return to its
normal function.
NOTE
The operating hours counter starts only after an engine speed of more than
500 rpm is reached.