Arctic Cat Prowler 700i HDX 2015, User Manual

Page: 30 / 94

4 Controls
30
4.12 Removing and installing seats
Using the seat release, you can unlock the seats for removal.
4.12.1 Removing and installing seats (Wildcat)
Removing the seat:
1. Pull seat release on the rear side of the seat upwards.
2. Lift rear end of the seat and swivel forwards.
3. Pull seat backwards, out of the floor mounts, and lift out of the vehicle.
Installing the seat:
1. If necessary, remove dirt from the floor mounts.
2. Lift seat into the vehicle and insert into the floor mounts.
3. Swivel end of the seat downwards and press until the seat release engages.
4.12.2 Removing and installing seats (Prowler)
Removing the seat:
1. Pull seat release on the front side of the seat upwards.
2. Lift front end of the seat and push forwards.
3. Lift seat out of the vehicle.
Installing the seat:
1. If necessary, remove dirt from the floor mounts.
2. Lift seat into the vehicle and insert rear side of the seat into the floor mounts.
3. Swivel seat front downwards and press until the seat release engages.
WARNING
Before driving, make sure that all seats are locked correctly.
NOTE
Both seats are removed and installed in the same way.